Privacy Policy
Privacy Notice
We
know that you care how information about you is used and shared, and ...More
Return Policy
You may return most new, unopened items for a full refund within 30 days of delivery. These items ...More
Terms of Use
**INTERNATIONAL SHIPPING?**
Please read these terms for more information about ...More
POWER COMMANDER V (Dynojet)
|
|||
 |
Drag Specialties Fatbook 2010 Starting at $369.95 |
||
- Features
- Request Information
- Send to a Friend
- Analog input allows user to install any 0-5 volt sensor
- Build an adjustment table based on analog input such as boost or temperature
- Gear/speed input allows for map adjustment based on gear
- Two position map switching function built in
- Can add any SPST switch and toggle between two different fuel/timing maps
- Enhanced “accel pump” utility
- Made in the U.S.A.
- More tuning ranges than PCIII USB
- Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
- Ten throttle position columns
- The Power Commander III USB allowed you to add extra fuel during start-up based on “number of revolutions” of the engine
- Now the Power Commander V can read the exact engine temp through the bike’s own ECM which allows the tuner to choose how much fuel to add
- ”Warm up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
- Fuel and timing control
- Rev Xtend
- Easy to install
- USB powered from computer; 9 volt adapter is no longer needed
- Reduced size from the PCIII USB
- Cold starting on heavily modified engines should now be much more controllable and easy to adjust
- Software displays J1850 data from bikes’ stock ECU